Canon iPF720 - imagePROGRAF Color Inkjet Printer Service Manual Download Page 27

Page: 27 / 204

Chapter 1

1-13

1.5 Names and Functions of Components

1.5.1 Front

0012-6202

F-1-12

[1] Top cover

Open this cover when installing the printhead, load media and clear jams inside the printer.

[2] Eject guide

Supports ejected media to keep it from floating up.

[3] Maintenance cartridge

Blots excess inks.

[4] Maintenance cartridge cover

Open this cover to replace the maintenance cartridge.

[5] Operation panel

Operate the printer or check its status from this panel.

[6] Ink tank cover

Open this cover to replace ink tanks.

[7] Stand (option)

It is a stand that puts the printer.

[8] Output stacker (included with stand)

It is a stacker made of the cloth that stacks the ejected media.

[2]

[1]

[3]

[8]

[5]

[4]

[7]

[6]

Summary of Contents for iPF720 - imagePROGRAF Color Inkjet Printer













































































































































































































Search results

Summary of Contents for iPF720 - imagePROGRAF Color Inkjet Printer

Reviews:

Brands by name

Popular brands

Canon iPF720 - imagePROGRAF Color Inkjet Printer, Service Manual

Search results

Summary of Contents for iPF720 - imagePROGRAF Color Inkjet Printer

Reviews:

Brands by name

Popular brands