14
Before loading rolls, make sure the printer is clean inside the
Top Cover
and around the
Ejection Guide
. If these
areas are dirty, we recommend cleaning them in advance. (
→
, If Paper is Soiled)
•
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
•
Press
▲
or
▼
to select
Yes
, and then press the
OK
button. Remove the paper and go to the next step.
1
2
3
4
Press the
Load
button.
Press
▲
or
▼
to select
Load Roll Paper
, and then press
the
OK
button.
Loading Rolls in the Printer
Load rolls in the printer as follows.
Positioning your hands as shown, open the
Roll Cover
.
Holding the
Roll Holder
fl
ange (a), rest the
Roll Holder
shaft on the
Roll Ledge
(b).
At this time, position the holder so that the R label on the
Roll Holder
fl
ange (c) is aligned with the R label on the
printer (d), as shown.
OK
a
c
d
b
b
