(4/
24
)
LED
(Blinking in
orange)
Error
Error
code
Solution Remarks
10 times
Automatic duplex
printing cannot be
performed.
[1310] The paper length is not supported
for duplex printing.
Press the
Resume/Cancel
button
to eject the paper being used at
error occurrence.
Data which was to be printed on
the back side of paper at error
occurrence is skipped (not
printed).
Data which was to be
printed on the back
side of paper at error
occurrence is not
printed.
11 times
Failed in automatic print
head alignment.
[2500]
Press the Resume/Cancel button
to clear the error, then perform the
automatic print head again.
(In the iP4700 / iP4760, use Matte
Photo Paper MP-101.)
13 times
The remaining ink
amount unknown.
[1683]
Replace the applicable ink tank
with a new one. Printing with a
once-empty ink tank can damage
the printer.
To continue printing without
replacing the ink tank(s), press
the Resume/Cancel button for 5
sec. or longer to disable the
function to detect the remaining
ink amount. After the operation, it
is recorded in the printer
EEPROM that the function to
detect the remaining ink amount
was disabled.
The ink tank installed
is judged to have once
been empty.
14 times
Ink tank not recognized. [1684]
A non-supported ink tank (an ink
tank that is sold in a different
region from where the printer was
purchased) is installed (the ink
tank LED is turned off). Install the
supported ink tanks.
15 times
Ink tank not recognized. [1682]
A hardware error occurred in an
ink tank (the ink tank LED is
turned off). Replace the ink
tank(s).
