26
Routine Maintenance
1
Make sure that the printer is on.
2
Open the Paper Output Tray and extend the Output Tray Extension.
Set the Paper Thickness Lever to the left. For details on the Paper Thickness Lever, refer to
“Inside” in “Main Components” of the
User’s Guide
on-screen manual.
3
Open the
Canon IJ Printer Utility
dialog box.
4
Start Print Head Deep Cleaning.
(1)
Make sure that
Cleaning
is selected in the pop-up menu.
(2)
Click
Deep Cleaning
.
(3)
Confirm the displayed message and click
OK
.
Print Head Deep Cleaning starts when the
Power
lamp starts flashing green.
Do not perform any other operations until Print Head Deep Cleaning finishes. This takes
about one to two minutes.
5
Check the condition of the Print Head.
(1)
Load a sheet of A4 or Letter-sized plain paper in the Rear Tray.
(2)
Print the nozzle check pattern to check the print head condition.
See “Printing the Nozzle Check Pattern” on page 19.
(3)
If the problem is not resolved, perform Print Head Deep Cleaning again.
(4)
If this does not solve the problem, a FINE Cartridge may have run out of ink. Replace it
with a new one. See “Replacing a FINE Cartridge” on page 31.
Note
Clicking
Initial Check Items
displays the items to be checked before deep cleaning.
