1x
[1]
[2]
NOTE:
For ease of disassembly, remove the rear side first and
then keep front side down to remove this machine.
Removing the Stapler Unit
■ Preparation
1. Remove this machine from the host machine.
“Removing this Machine from the Host Machine” on
page 43
2. Remove the Front Cover Unit.
■ Procedure
1. Remove the Stapler Unit [1] at the Stapler Mount.
• 1 Screw [2]
1x
[2]
[1]
[3]
NOTE:
In the diagrams, number [3] is the spare screw hole.
2. Remove the Cable Cover [1].
• 2 Claws [2]
[2]
[1]
[2]
3. Remove the PCB Holder [1].
• 1 Screw [2]
[1]
[2]
1x
4. Remove the Stapler Unit [1].
• 2 Connectors [2]
[2]
[1]
2x
■ Handling after parts replacement
1. Clear the parts counter.
(LV1) COPIER > COUNTER > DRBL-2 > FIN-STPR
4. Disassembly/Assembly
62
Summary of Contents for Inner Finisher-J1
