Canon Inner Finisher-J1, Service Manual

Page: 69 / 101

Removing the Staple-free
Staple Unit
■ Preparation
1. Remove this machine from the host machine.
“Removing this Machine from the Host Machine” on
page 43
2. Remove the Rear Cover. “Removing the Rear Cover”
on page 54
■ Procedure
1. Remove the Connector [1] and the Cable [2].
[1]
[2]
1x
1x
2. Remove the Staple-free Staple Unit [1].
• 2 Screws [2]
[1]
[2]
2x
CAUTION:
How to assemble the Staple-free Staple Unit
When assembling, be sure to align the groove [1] of the
Staple-free Staple Unit with the Stepped Screw [2].
[1]
[2]
■ Handling after parts replacement
1. Clear the parts counter.
(LV1) COPIER > COUNTER > DRBL-2 > FR-STPL
2. If the limited function message of the staple-free
stapling is shown on the host machine's LUI, clear
the message on the service mode.
(LV1) SORTER > FUNCTION > EMSG-CLR
4. Disassembly/Assembly
63