manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Servise Manual

Share
Download
Canon ImageRunner iR8500 Series Servise Manual Download Page 576

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR8500 REV.0 MAR. 2001

SERVICE MODE

S-79

COPIER>FUNCTION

PWD-CLR

Use it to clear the password of the ‘system administrator’ selected in user
mode.
<Using the Mode>
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.

ADRS-BK

Use it to clear all addresses stored in the address book.
<Using the Mode>
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.

CNT-MCON

Use it to clear the counter readings for service whose data is kept by the
main controller PCB.
<Using the Mode>
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.

CNT-DCON

Use it to clear the counter readings for service whose data is kept by the DC
controller PCB.
<Using the System>
1) Select the item and press the OK key.
2) Turn off and then on the main power switch.

MMI

Use it to clear the backup data of user mode settings (specifications, ID
mode, group ID, mode memory, etc.).
<Using the Mode>
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.

CARD

Use it to clear a group ID for the card reader.
<Using the Mode>
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.

ALARM

Usee it to clear the alarm history.
<Using the Mode>
1) Select the mode, and press the OK key.
2) Turn off and then on the main power switch.

Service_4.p65

01/03/14, 9:39

79

Summary of Contents for ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands