manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Servise Manual

Share
Download
Canon ImageRunner iR8500 Series Servise Manual Download Page 564

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR8500 REV.0 MAR. 2001

SERVICE MODE

S-67

COPIER>FUNCTION

<INSTALL>

Use it at time of installation.

TONER-S

Use it to supply toner from the hopper to the developing assembly and to
stir the toner inside the developing assembly.

• Before pressing the OK key, check to make sure that the developing

assembly is securely mounted.

• Do not turn off the power while machine is in operation.

Using the Mode
1) Select the item, and press the OK key.
2) See that the machine supplies toner. (about 8 to 10 min)
•

While toner is being supplied, a count-down is indicated in sec starting
at 600 sec.

3) See that the machine automatically stops toner supply.

CARD

Use it to enter numbers for the cad reader.

Input value

1 to 200

Default: 0 (not connected)
As many as 1000 cards may be used (starting with the number entered; e.g.,
If the number entered is 1, cards between No. 1 and No. 1000 may be used.
If the number entered is 2001, cards between No. 2001 and 3000 may be
used.

Service_4.p65

01/03/14, 9:39

67

Summary of Contents for ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands