Canon imageRUNNER ADVANCE C7260 Basic Operation Manual Download Page 266

Page: 266 / 300

266

Question

Applicable Page

I want to make a rush copy, but I cannot because of the long copy job.

p. 268

When copying, the Scan screen for the next document is displayed. Is there a way to not display this screen?

p. 268

How do I change the default settings for the Copy from the Color mode to the Black mode?

p. 269

Can a mark be applied to the document that has been scanned?

p. 269

Do I need to enter the address of the recipient every time?

p. 270

Can I send a fax to multiple destinations?

p. 270

Can you give me information on how to send to the SMB server and specify its settings?

p. 271

Can I move the Address Book registered on another Canon machine onto this machine?

p. 273

Can I forward the data received via fax/I-fax?

p. 273

Q10

When sending a fax, can the machine be set so that the sender’s fax number and name be displayed?

p. 274

Q11

How do I change the default settings (scan settings and fi le format) of the Scan and Send Basic Features screen?

p. 274

Q12

Is there a way to prevent a transmission error when sending a facsimile to a new destination?

p. 275

Q13

The quality of the image sent by fax is not good.

p. 276

Q14

How can I make use of multiple telephone lines?

p. 276

Q15

How do I register/edit destinations in a one-touch button?

p. 277

Q16

Can I add an arbitrary subject when sending e-mail?

p. 278

Q17

How do I change the storage period for the scanned fi le stored in the Mail Box?

p. 278

Q18

How do I access the Advanced Box from a computer?

p. 279

Q19

How do I forward received data to the Advanced Box?

p. 279

Q20

How do I set to create a booklet with a fi le in a mail box?

p. 280

Q21

I cannot print PDF fi les stored in the Advanced Box. Are optional products required?

p. 280

Q22

When printing from the computer, booklet was not made even though saddle stitch booklet mode was set.

p. 281

Q23

The content of the reverse side appears on the copies.

p. 282

Q24

The printed paper appears dirty. Also, the color appears to be diff erent from the original.

p. 282

Q25

The printed paper is warped.

p. 283

Q26

I had printed from the computer, but I did not fi nd the output. I am afraid that someone may have taken it by mistake.

p. 283

Q27

Can I specify the scan settings from the computer and then store for the original loaded in the machine?

p. 284

Q28

Can I make copies or send a facsimile of diff erent size originals at the same time?

p. 284

Frequently Asked Questions

This section includes frequently asked questions and answers regarding the machine. Use this section if you have trouble using the
machine.

Summary of Contents for imageRUNNER ADVANCE C7260













































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C7260

Reviews:

Related manuals for imageRUNNER ADVANCE C7260

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C7260, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C7260

Reviews:

Related manuals for imageRUNNER ADVANCE C7260

Brands by name

Popular brands