Canon imageRUNNER ADVANCE C7260 Basic Operation Manual Download Page 202

Page: 202 / 300

202

Close the guide (M-A2) and the front cover.

1 Close the guide (M-

A2).

2 Close the front cover.

When closing the guide and the cover, be careful not to get your fi ngers caught, as this may result
in personal injury.

If the paper jam message is displayed even after the paper jam is cleared, check whether there is any paper
left by opening the entrance guide.

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper
jam is cleared.

Summary of Contents for imageRUNNER ADVANCE C7260













































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C7260

Reviews:

Related manuals for imageRUNNER ADVANCE C7260

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C7260, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C7260

Reviews:

Related manuals for imageRUNNER ADVANCE C7260

Brands by name

Popular brands