manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Basic Operation Manual

Share
Download
Canon imageRUNNER ADVANCE C5255 Basic Operation Manual Download Page 89

89

Routine Maint

enanc

e

3

Pull out the empty staple cartridge from the staple case.

PUSH

2

1

1

1.  Press the areas indicated by 

PUSH on both sides of the 
staple case.

2.  Once you have released the 

spring-loaded case, pull out 
the staple cartridge.

4

Insert a new staple cartridge into the staple case.

2

1

3

1.  Insert a new staple cartridge.
2.  Press the spring-loaded 

case down until it clicks into 
place.

3.  Remove the seal holding the 

staples together, by pulling 
it straight out.

•  Do not remove the seal that holds the staples together before you place the staple cartridge into the 

staple case.

•  Only one staple cartridge can be inserted at a time.
•  Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.

5

Gently push the staple case back into the fi nisher and push down fi rmly until it 
is securely in place.

Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Summary of Contents for imageRUNNER ADVANCE C5255

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands