59
Routine Cleaning
Originals Cannot Be Scanned Properly
(Cleaning the Platen Glass)
If the platen glass or the underside of the feeder is dirty,
the original may not be scanned clearly. Clean the platen
glass and the underside of the feeder by following the
procedure below.
2
1
1. Clean the platen glass.
2. Clean the underside of the feeder.
NOTE
)
If stains will not come out, use detergent instead of
water.
)
When the glass cleaning sheet is dirty, rinse it with
water and spread it out to let it dry.
Scanned Originals Become Dirty
(Manual Feeder Cleaning)
If originals that have been fed through the feeder have
streaks or appear dirty, clean the feed rollers.
IMPORTANT
Spin the rollers while cleaning them.
01
Clean the rollers of the feeder.
1. Open the feeder cover.
2. Clean the rollers (a total of two places) inside the
feeder cover.
1
2
02
Clean the inside of the inner cover of
the feeder.
1. Open the inner cover of the feeder.
2. Clean the transparent plastic (a total of two places).
1
2
3. Close the inner cover of the feeder.
CAUTION
When closing the inner cover of the feeder, be careful
not to get your fingers caught, as this may result in
personal injury.
Summary of Contents for imageRUNNER ADVANCE C250iF
