Canon imageRUNNER ADVANCE C250iF Starter Manual Download Page 14

Page: 14 / 96

Installing the Machine

Removing the Packing Materials

When performing the following
steps, make sure to remove all
orange tape attached to the
machine.

Remove the items and packing

materials from the paper drawer.

1. Grip the handle, and pull out the paper drawer until

it stops.

2. Remove the box containing the included items.

3. Remove the packing materials attached to the paper

drawer.

Gently push the paper drawer back into

the machine.

CAUTION

When returning the paper drawer to its original
position, be careful not to get your fingers caught, as
this may result in personal injury.

Lift the feeder tray and remove the

Service Book Holder.

Summary of Contents for imageRUNNER ADVANCE C250iF

































































































Search results

Summary of Contents for imageRUNNER ADVANCE C250iF

Reviews:

Related manuals for imageRUNNER ADVANCE C250iF

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C250iF, Starter Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C250iF

Reviews:

Related manuals for imageRUNNER ADVANCE C250iF

Brands by name

Popular brands