0
Setting Up the M
achine f
or the F
irst
Time
2
Using E-Mail/I-Fax
You can send originals scanned on the machine
using e-mail or internet fax (I-fax).
This example describes the procedure for sending
a design proposal in PDF format.
The flow of operations is indicated below.
. Settings Required to Send E-Mail/I-Faxes
Specifying E-Mail/I-Fax Settings
Storing New Destinations
Sending an E-Mail Message
Settings for receiving e-mail/I-faxes must also be specified. For
information on the settings, see e-Manual > Settings/Registration
> Common Communication Settings for E-Mail/I-Fax.
Settings Required to Send E-
Mail/I-Faxes
Communication settings must be specified to send e-mail/I-
faxes.
The following example describes the procedure for the
settings below:
<Communication Settings: Basic Settings>
[E-Mail Address]: [email protected]
[SMTP Server]: 9.68..
<Communication Settings: Authentication
Settings>
<SMTP Authentication (SMTP AUTH)>: On
[User Name]: user_name
*
[Password]: password
*
To specify the communication server settings, you must log in as an
administrator. To log in as an administrator, see “Logging In to the
Machine as an Administrator,” on p. 8.
*1 The user name and password for logging in to the SMTP server.
Specifying E-Mail/I-Fax Settings
Press
(Settings/Registration).
•
•
•
Press [Function Settings].
Press [Send].
Press [E-Mail/I-Fax Settings].
Summary of Contents for imageRUNNER ADVANCE C2020
Page 52: ...50 Setting Up the Machine for the First Time 2 MEMO...
Page 67: ......
