imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide
December 2013
Revision 1
Page 96
Table 51 – Copy Card Reader-F1
Copy Card Reader-F1
Item
Specification
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Card Reading Direction
Inserting Direction
Store/Replay
Replay
Power Source
From the main unit
Dimensions (H x W x D)
Approximately
1 5/8" x 3 1/2" x 3 3/4" (40 mm x 88 mm x 96 mm)
Weight
Approximately 7.1 oz (200 g)
Table 52 – Super G3 Fax Board-AL1
Super G3 Fax Board-AL1
Item
Specifications
Telephone Line Used
Public Switched Telephone Network
Scan line Density (Scan,
Transmission)
Normal: 8 pels
/mm x 3.85 line/mm
Fine: 8 pels/mm x 7.7 line/mm
Super-Fine: 8 pels/mm x 15.4 line/mm
Ultra-Fine: 16 pels/mm x 15.4 line/mm
Transmission Speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Sizes
11” x 17” to STMTR
Receiving Paper Sizes
11” x 17” to STMTR
Transmission Times
JBIG: Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations (including destinations stored in one-touch
buttons)
Image Memory
Approximately 20,000 pages
63
When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is
recommended to use facsimile communication via a general telephone (Public Switched Telephone Network) line.
64
Pels stands for picture elements (pixels)