Canon imageRUNNER 6570 Reference Manual Download Page 446

Page: 446 / 600

Finisher-T1/Saddle Finisher-T2/Puncher Unit-M1 (Optional)

8-24

ine M

nance

Insert the new staple cartridge.

Press the spring-loaded case down until it clicks into place.

IMPORTANT

•

Use only staple cartridges intended for use with this machine.

•

Do not remove the seal that holds the staples together before you place the staple
cartridge into the staple case.

NOTE

Only one staple cartridge can be inserted at a time.

Remove the seal holding the staples together, by pulling it
straight out, and then down.

IMPORTANT

Make sure that you pull the seal straight out, and then down. If you pull it out at an
angle, it may tear.

PUSH

Summary of Contents for imageRUNNER 6570

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 6570

Reviews:

Brands by name

Popular brands

Canon imageRUNNER 6570, Reference Manual

Search results

Summary of Contents for imageRUNNER 6570

Reviews:

Brands by name

Popular brands