Canon imageRUNNER 6570, Reference Manual

Page: 240 / 600

Specifying Common Settings 4-72
4
Cust
om
iz
in
g
Set
ti
ng
s -
C
o
m
m
on
Set
ti
ng
s
Standard Local Print Settings
You can set the standard print settings for the machine. The Standard Local Print
Settings are used in the following cases:
*1 Indicates the default setting.
• If you print documents stored in inboxes without changing the print settings
• If you merge and print multiple documents stored in an inbox
• If you reset the settings before printing a document that has been sent from a
computer and stored in an inbox
The Standard Local Print Settings are:
• Paper Select (Paper source): Auto *1
• Copies: 1 *1
• Finisher:
- The optional Copy Tray-L1 is attached:
Do Not Collate, Collate
*1
, Rotate Collate, Group, Rotate Group
- The optional Finisher-T1 or Saddle Finisher-T2 is attached:
Do Not Collate, Collate, Offset Collate
*1
, Group, Offset Group, Staple (Corner:
Top Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right)
- The optional Finisher-T1 or Saddle Finisher-T2, and Puncher Unit-M1 are
attached:
Do Not Collate, Collate, Offset Collate
*1
, Group, Offset Group, Staple (Corner:
Top Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right), Hole Punch
- Face Up/Face Down (for all finishers):
Auto *1 :
If you scan and print a single page original, or print on
nonstandard sized paper, or other available paper that is
loaded in the stack bypass, the printed sheets are output
face up. Otherwise, the printed sheets are output face down.
Face Down (Normal):Printed sheets are always output face down.
Face Up (Reverse): Printed sheets are always output face up.
• Two-sided Print: On, Off
*1
• Erase Document After Printing: On, Off *1
• Merge Documents: On, Off *1