Canon ImageRunner 4025, Basic Operation Manual, Page: 84 / 180

84
3
Return the punch waste tray to its original position .
1
2
1.■ Push■the■punch■waste■
tray■back■into■its■original■
position.
2.■ Close■the■front■cover■of■the■
punch■waste■tray.
If the punch waste tray is not securely in place, you cannot make prints in the Hole Punch mode.
Inner 2/3 Hole Puncher-A1
The Inner 2/3 Hole Puncher-A1 is available only if the Inner Finisher-D1 is attached.
1
Pull out the punch waste tray .
1
2
1.■ Open■the■front■cover■of■the■
inner■finisher.
2.■ Pull■out■the■punch■waste■
tray.
When closing the cover, be careful not to get your fingers caught, as this may result in personal
injury .