Canon ImageRunner 4025, Basic Operation Manual, Page: 75 / 180

75
Routine
■M
ain
tenanc
e
Replacing the Stamp Cartridge
(Feeder)
Originals sent via the feeder can be stamped to indicate that they have been sent. Replace the stamp cartridge when the
stamp mark is faint or no longer visible.
When replacing the stamp cartridge, take care not to allow ink to come into contact with your hands or
clothing . If ink gets onto your hands or clothing, wash it off immediately with cold water .
The feeder is standard-equipped for the imageRUNNER ADVANCE 4051/4045.
1
Open the covers .
1
2
1
1.■ Pull■the■lever■
→
open■the■
feeder■cover.
2.■ Open■the■inner■cover,■
holding■it■by■its■tab.
2
Load the stamp cartridge .
1
2
1.■ Remove■the■old■stamp■
cartridge,■using■tweezers.
2.■ Push■in■the■new■stamp■
cartridge■until■it■clicks,■using■
tweezers.
• Make sure that the stamp cartridge is not protruding from the surface.
• Insert the stamp cartridge properly, or paper jams may occur.