manualshive.com logo in svg

Canon ImageRunner 4025, Basic Operation Manual, Page: 133 / 180

Share
Download
Canon ImageRunner 4025 Basic Operation Manual Download Page 133

133

Troubleshooting

4

Gently push the staple case back into the finisher and push down firmly until it 

is securely in place . 

5

Close the front cover of the finisher .

After the cover is closed, the stapler unit may automatically perform a “dry” stapling operation to reposition 

the staples.

Saddle Stitcher Unit of the Booklet Finisher-G1

Check the location of the staple jam, and follow the procedure described below, while referring to the directions that 

appear on the touch panel display, to remove the jammed staple.

•  Make sure to close all covers and paper drawers of the machine before clearing any staple jams.

•  Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.

The Booklet Finisher-G1 is an optional product.

1

Open the front cover of the finisher .

When closing the cover, be careful not to get your fingers caught, as this may result in personal 

injury .

Summary of Contents for ImageRunner 4025





















































































































































































Reviews:

No comments