manualshive.com logo in svg

Canon ImageRunner 4025, Basic Operation Manual, Page: 104 / 180

Share
Download
Canon ImageRunner 4025 Basic Operation Manual Download Page 104

104

Main Unit

Check the location of the paper jam, and follow the procedure described below, while referring to the directions that 

appear on the touch panel display, to remove the jammed paper.

•  If the Paper Deck Unit-B2 is attached, move the paper deck unit away from the main unit before proceeding with this 

procedure.

•  If paper is loaded in the multi-purpose tray, remove the loaded paper.

•  This section uses illustrations of the machine with the Inner Finisher-D1 attached.

1

Open the right cover of the machine .

2

1

1.■ ■Press■the■open■button■of■the■right■

cover■of■the■machine.

2.■ Open■the■right■cover■of■the■machine.

Inner 2Way Tray-H1 (Optional) (p. 129)

Feeder (p. 115)

When the Inner 2/3 Hole Puncher-A1 Is 
Not Attached (p. 125)

When the Inner 2/3 Hole Puncher-A1 Is 
Attached (p. 126)

Summary of Contents for ImageRunner 4025





















































































































































































Reviews:

No comments