Canon imageRUNNER 2535, Service Manual, Page: 70 / 362

2
2
2-44
2-44
Technology > Fixing System > Overview > Specifications
Technology > Fixing System > Overview > Specifications
Fixing System
Overview
■ Features
This machine introduces the on-demand fixing method.
Pressure roller Fixing inlet guide
Fixing delivery roller
Separation guide
Fixing film
Fixing heater
F-2-70
■
Specifications
Item Function/method
Fixing method On-demand fixing
Fixing speed Cassette feeding
233mm/sec (1/1-high speed: 0.8% speed-up)
230mm/sec (1/1-speed)
224mm/sec (1/1-slow speed: 3.1% speed-down)
Manual feeding
139mm/sec (1/1-high speed: 0.8% speed-up)
137mm/sec (1/1-speed)
133mm/sec (1/1-slow speed: 3.1% speed-down)
Fixing heater Ceramic heater
Control temperature
Cassette feeding 225 deg C (plain paper) *1
Manual feeding 180 deg C (plain paper) *1
Temperature
detection
By the main thermistors and the sub thermistors (front) and (rear)
Cleaning control Cleaning sequence control
Edge heat rising
prevention control
Paper edge cooling fans (front)/(rear) and sequence control
Fixing loop control Loop sensor
Protective Function Main thermistor and Sub thermistors (front)/(rear)
Thermo Switch (operating temperature: 250 deg C)
*1. Target temperature is specified depending on the fixing mode and the fixing temperature
at the start of warm-up control.
T-2-27