Canon imageRUNNER 2535, Service Manual, Page: 233 / 362

8
8
8-23
8-23
document fed from ADF)>
Correct the magnification of vertical scanning of a document fed from the ADF. The larger the
adjustment value, the more the image stretches in the vertical scanning direction.
● <048: Horizontal scan magnification correction (when scanning on a
document fed from ADF)>
Correct the magnification of horizontal scanning of a document fed from the ADF. The smaller
the adjustment value, the more the image stretches in the horizontal scanning direction.
● <193: ADF special standard-sized paper: LGL misidentification-
ready>
"Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because
it is misidentified as "LEGAL").
0 : LEGAL
1 : FOOLSCAP
2 : M_OFICIO
3 : A_FOOLSCAP
4 : FOLIO
5 : G_LEGAL
6 : A_OFICIO
7 : B_OFICIO
8 : OFICIO
9 : E_OFICIO
● <194: ADF special standard-sized paper: LTR misidentification-
ready>
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because
it is misidentified as "LTR").
0: LTR
1: G_LTR
2: A_LTR
● <195: ADF special standard-sized paper: LTR_R misidentification-
ready>
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because
it is misidentified as "LTRR").
0: LTR_R
1: FOOLSCAP
2: OFFICIO
3: E_OFFICIO
4: G_LTR_R
5: A_LTR_R
0: LTR_R
1: FOOLSCAP
2: OFFICIO
3: E_OFFICIO
4: G_LTR_R
5: A_LTR_R
■
READER
● (#SCAN> READER> DISPLAY> CCD> TARGET-B)
Target value of shading for blue
If the scanned image has some failure, check the target value of shading for blue.
If the machine continues to display 0 (minimum) or FFFF (maximum), there may be some
problem on CCD unit.
Appropriate guideline :1 to 2047
● (#SCAN> READER> DISPLAY> CCD> TARGET-G)
Target value of shading for green
If the scanned image has some failure, check the target value of shading for green.
If the machine continues to display 0 (minimum) or FFFF (maximum), there may be some
problem on CCD unit.
Appropriate guideline :1 to 2047
● (#SCAN> READER> DISPLAY> CCD> TARGET-R)
Target value of shading for red
If the scanned image has some failure, check the target value of shading for red.
If the machine continues to display 0 (minimum) or FFFF (maximum), there may be some
problem on CCD unit.
Appropriate guideline :1 to 2047
● (#SCAN> READER> DISPLAY> CCD> OFST-B)
Adjustment value of offset level on CCD (blue)
● (#SCAN> READER> DISPLAY> CCD> OFST-G)