Canon imageRUNNER 2535, Service Manual, Page: 52 / 362

2
2
2-26
2-26
Technology > Controller System > Controls > Power supply
Technology > Controller System > Controls > Power supply
● Energy-saving Function
Energy-saving
mode
Sleep 1
Standby
mode
Sleep 2
- Press of energy-saving key
- Detection of off-hook
- Occurrence of service call
Press of power switch
on control panel
- Detection of off-hook
- Occurrence of job
- Occurrence of service call
- Press of energy-saving key
- Lapse of auto sleep time
- Lapse of 2 minute
after completion of job
- 10 seconds after
completion of job or
network communication
- Network, alarm, FAX reception
- Press of power switch on
control panel
Standby mode
The machine is operating or ready to start operating with all power supplies provided.
Energy-saving mode
Only the LCD backlight for the control panel is turned off. The machine enters this mode
when auto sleep timer is activated in the user mode or the energy-saving key is pressed.
Sleep 1
The controller is powered but the engine is not powered.
Sleep 2
The controller is not powered.
The sleep 2 mode is transitioned to the sleep 1 mode when the following event occurs:
- Start of print job
- Press of power switch on control panel
- FAX reception
F-2-47
● Connection to Options
Reader/ADF
Inner finisher
Wiring inside
the machine
2-cassette pedestal
The inner finisher is connected to the 2-cassette pedestal with the connectors inside the
covers.
It is connected to the ADF with a cable outside the machine.
F-2-46