manualshive.com logo in svg

Canon imageRUNNER 2520 Series, Service Manual, Page: 79 / 402

Share
Download
Canon imageRUNNER 2520 Series Service Manual Download Page 79

■ Standby temperature control

Max. 10 sec

      Fixing
temperature

STBY

INTR

PRNT

Flying start
   control
temperature

Time

Command for
  flying start

● Flying start temperature control

Purpose:

• To reduce the print time (FPOT) of the 1st sheet

Starting conditions:

• When opening the copyboard cover or ADF, and also the detection temperature of the main thermistor is less than 100 deg

C.

• When the original sheet is set on the ADF tray, and also the detection temperature of the main thermistor is less than 100

deg C.

• When the main power switch is turned ON or the machine condition is shift from the sleep mode to standby, and also the

detection temperature of the main thermistor is less than 155 deg C.

Control description:

• The target control temperature is set to 165 deg C and the fixing motor starts to rotate with a half speed. The control continues

for maximum 10 seconds.

2. Technical Explanation

69

Summary of Contents for imageRUNNER 2520 Series



















































































































































































































































































































































































































Reviews:

No comments