manualshive.com logo in svg

Canon imageRUNNER 2520 Series, Service Manual, Page: 77 / 402

Share
Download
Canon imageRUNNER 2520 Series Service Manual Download Page 77

■ Major parts configuration

Thermo switch (TP1)

Film unit

Pressure roller

Main thermistor (TH1)

Sub thermistor (TH2)

Fixing hiater (H1/H2)

Fixing outlet sensor (S19)

Cleaning Roller

Part name

Function / method

---

Film unit

Applying heat and pressure makes the toner image on paper fixed (fused).

---

Pressure roller

H1/H2

Fixing heater

Ceramic heater

TH1

Main thermistor

To be in contact with the heater
Temperature control, detection of abnormal temperature rise

TH2

Sub thermistor (rear)

To be in contact with the heater (non-feeding area)
Temperature control, detection of abnormal temperature rise, temperature de-
tection/cooling control on the edges

TP1

Thermo Switch

To be in contact with the heater (non-feeding area)
Temperature control, detection of abnormal temperature rise, temperature de-
tection/cooling control on the edges

S19

Fixing outlet sensor

Jam detection

2. Technical Explanation

67

Summary of Contents for imageRUNNER 2520 Series



















































































































































































































































































































































































































Reviews:

No comments