1
Placing Originals
1-45
Bef
ore
Y
ou Star
t Using
This Machine
IMPORTANT
•
Originals of 11-lb bond (40g
/m
2
) or less may become creased, if used in a high temperature or high
humidity environment.
•
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon-backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
•
If the feeder rollers are soiled from scanning an original written with pencil, perform the Feeder
Cleaning procedure. (See ‘Cleaning the Feeder
1
,’ on p. 5-17, and ‘Cleaning the Feeder
2
,’ on p.
5-20.)
1
Adjust the slide guides to fit the size of the originals.
2
Neatly place your originals face up in the original supply tray.
When enlarging LTR or STMT-size originals to 11" x 17" or LGL-size paper, place your
originals horizontally.
Place the original as far as it will go, until the original set indicator is lit.
