manualshive.com logo in svg

Canon imageRUNNER 2200, Reference Manual

Share
Download
Canon imageRUNNER 2200 Reference Manual Download Page 212

5

Consumables and Options

5-24

Routine Maintenance

■

Black Toner

When the <Add toner.> message appears on the touch panel display, add toner which has 
been approved for use with this machine. 

WARNING

•

Never dispose of waste toner in a fire or incinerator. Doing so may result in an explosion.

CAUTION

•

Do not store toner cartridges in places exposed to open flames, as this may cause the 
toner to ignite and result in burns or a fire.

IMPORTANT

•

Store toner cartridges in a cool location, away from direct sunlight.

- The recommended storage conditions are: temperature below 86°F, and humidity below 80%.

■

Genuine Supplies

Canon has developed and manufactured parts, supplies, and GPR-6 Toner speci

fi

cally for 

use in this machine. For superior print quality, we recommend that you use Canon-
GENUINE brand parts, supplies, and GPR-6 Toner in this machine. Ask your authorized 
Canon dealer or service provider for Canon-GENUINE brand parts, supplies, and GPR-6 
Toner.

Summary of Contents for imageRUNNER 2200















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands