manualshive.com logo in svg

Canon imageRUNNER 2200, Reference Manual

Share
Download
Canon imageRUNNER 2200 Reference Manual Download Page 27

Periodic Inspection of the Breaker

xxv

Periodic Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current. Be sure to test 
the breaker once or twice a month using the following procedure.

IMPORTANT

•

Make sure that the main power is turned ON, and the machine is neither printing nor scanning 
before starting a periodic inspection of the breaker.

•

If a malfunction occurs after a periodic inspection, contact your service representative.

1

Push the test button with the tip of a ball-point pen, or similar object.

IMPORTANT

•

Briefly push the test button.

NOTE
•

The breaker is located near the power cord.

Summary of Contents for imageRUNNER 2200















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands