Canon ImageRunner 2030i, Copying Manual

Page: 33 / 156

Placing Originals 1-22
1
Intr
odu
cti
on to
Co
p
y
ing
For instructions on cleaning the original scanning area, see Chapter 7, “ Routine
Maintenance, ” in the Reference Guide .
IMPORTANT
•
Do not add or remove originals while they are being scanned.
•
When scanning is complete, remove the originals from the original output area to
avoid paper jams.
NOTE
•
When you are enlarging an LTR or STMT original onto 11" x 17" or LGL paper,
place the original horizontally.
•
The scanned originals are output to the original output area in the order that they
are fed into the feeder.
•
You can place different size originals together into the feeder if you set the Different
Size Originals mode. (See “Different Size Originals,” on p. 3-22.)
Original Output Area