Canon imagePROGRAF W2200, Service Manual

Page: 75 / 76

W2200
Part 4 : Appendix
4-11
J901 (Centronics Interface Connector)
Pin No. Pin No. Pin No. Pin No. Compatible Mode Compatible Mode Compatible Mode Compatible Mode Nibble Mode Nibble Mode Nibble Mode Nibble Mode ECP Mode ECP Mode ECP Mode ECP Mode
1
STROBE
Host Clk Host Clk
2 DATA 1 Data 1 Data 1
3 DATA 2 Data 2 Data 2
4 DATA 3 Data 3 Data 3
5 DATA 4 Data 4 Data 4
6 DATA 5 Data 5 Data 5
7 DATA 6 Data 6 Data 6
8 DATA 7 Data 7 Data 7
9 DATA 8 Data 8 Data 8
10
ACKNLG
Prt Clk Periph Clk
11 BUSY Prt Busy Periph Ack
12 P.E. Ack Data Reg Ack Reverse
13 SELECT X flag X flag
14 AUTO FEED XT Host Busy Host Ack
15 N.C. Undefined Undefined
16, 17 GND Gnd Gnd
18 +5.0V Vcc Vcc
19 STROBE-RET Signal Gnd Signal Gnd
20 DATA1-RET Signal Gnd Signal Gnd
21 DATA2-RET Signal Gnd Signal Gnd
22 DATA3-RET Signal Gnd Signal Gnd
23 DATA4-RET Signal Gnd Signal Gnd
24 DATA5-RET Signal Gnd Signal Gnd
25 DATA6-RET Signal Gnd Signal Gnd
26 DATA7-RET Signal Gnd Signal Gnd
27 DATA8-RET Signal Gnd Signal Gnd
28 ACKNLG-RET Signal Gnd Signal Gnd
29 BUSY-RET Signal Gnd Signal Gnd
30 P.E-RET Signal Gnd Signal Gnd
31
INIT
INIT Reverse Req
32
ERROR
DATA Avail Periph Req
33 GND Undefined Undefined
34 N.C. Undefined Undefined
35 +5.0V Undefined Undefined
36
SELECT IN
1284 Active 1284 Active
J902 (USB)
Pin No. Pin No. Pin No. Pin No. Signal Signal Signal Signal IN/OUT IN/OUT IN/OUT IN/OUT Function Function Function Function
1 US VCC IN Cable power source
2 DATA – Data
3 DATA + Data
4 USGNG Cable GND