5
Press
▲
or
▼
to select
Feed Priority
, and then press the
OK
button.
6
Press
▲
or
▼
to select
Adjust Length
, and then press the
OK
button.
7
Press
▲
or
▼
to select
AdjustmentPrint
or
Change Settings
,
and then press the
OK
button.
When you select
AdjustmentPrint
, a test pattern is printed for
you to measure the scale and calculate the discrepancy. The
scale bar prints
Millimeter
in 50 mm increments and
Inch
in 1-
inch increments.
Note
•
A test pattern is printed in black when you choose
A:High
or in magenta if you choose
B:Standard/Draft
.
•
To cancel printing the test pattern for adjustment, hold down the
Stop
button. When "
Stop printing?
" is dis-
played, press
▲
or
▼
to select "
Yes
", and then press the
OK
button.
8
Press
▲
or
▼
to enter the amount of discrepancy, and then press the
OK
button.
If the scale is shorter than the actual size, use a positive setting value. If it is longer, use a negative value.
The feed amount can be adjusted in 0.02% increments.
iPF8400
Adjusting Line Length
Basic Guide
Adjustments for Better Print Quality
Adjusting the feed amount
101
