Canon imagePROGRAF iPF8400 Basic Manual Download Page 28

Page: 28 / 157

Important

•

If there is still ink in the Ink Tank you removed, store it in the
box with the ink holes (a) facing up. Otherwise, ink may leak
and cause stains.

Note

•

Dispose of used ink tanks according to local regulations.

Load the Ink Tank (330 ml)

Before opening the pouch, tilt the Ink Tank to the left
and right gently seven or eight times.

Important

•

Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.

•

If you do not agitate the Ink Tank, the ink may settle, which may affect printing quality.

Replacing Ink Tanks

iPF8400

Basic Guide

Consumables and Maintenance

Ink Tanks

Summary of Contents for imagePROGRAF iPF8400






























































































































































Search results

Summary of Contents for imagePROGRAF iPF8400

Reviews:

Related manuals for imagePROGRAF iPF8400

Brands by name

Popular brands

Canon imagePROGRAF iPF8400, Basic Manual

Search results

Summary of Contents for imagePROGRAF iPF8400

Reviews:

Related manuals for imagePROGRAF iPF8400

Brands by name

Popular brands