When setting up a USB connection, connect the USB cable during printer driver installation following the
instructions displayed.
•
When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you reinstall
the printer. In this case, be sure to recon
fi
gure the printer's IP address.
•
If you accidentally connect the USB cable
fi
rst, the printer driver may not be installed correctly.
12
1
2
The printer driver works over USB or network (TCP/IP) connections.
Supported connection methods
Installing the Printer Driver (Windows)
The basic instructions for installing the printer driver are as follows.
Installing the printer driver and user manual
For detailed instructions, see the Setup Guide
.
The driver installation procedure varies depending on the type of connection.
Windows 7, Windows Vista, Windows Server 2008, Windows Server 2003, Windows XP, and Windows 2000
Turn the computer on.
Insert the provided User Software CD-ROM
for the
appropriate operating system in the CD-ROM drive.
Compatible operating systems
Follow these steps to install the printer driver and User Manual
.
When setting up a TCP/IP (network) connection, after
making sure the printer is on, connect the LAN cable to
the Ethernet port on the back of the printer and to your
network hub port.
Summary of Contents for imagePROGRAF iPF8300
Page 23: ......
