Canon imagePROGRAF iPF810, User Manual, Page: 698 / 710

Other Messages
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for which
service is required. You can continue to use the printer for some time
until
Parts replacement time has passed. will be
displayed.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Cause Corrective Action
It is past the recommended time to replace
consumables for which service is required. Contact your Canon dealer for assistance.
Unknown le.
Cause Corrective Action
Data sent to keep the printer up to date (such as
paper information) is in the wrong format. Check the data. Turn off the printer and wait a while
before restoring power, and then resend the data.
Check the rmware version. Turn off the printer and
wait a while before restoring power, and then resend
the rmware. You have uploaded rmware for a different model.
If the message is displayed again, contact your
Canon dealer for assistance.
Multi-sensor error
Cause Corrective Action
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction. Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
The performance of a sensor inside the printer may
be impaired. Turn off the printer and wait at least three seconds
before restoring the power.
If the message is displayed again, contact your
Canon dealer for assistance.
684 Error Message