Canon imagePROGRAF iPF810, User Manual, Page: 655 / 710

Problems with the printing quality
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is out of adjustment. Adjust the feed amount.
(→P.562)
Load paper of the same type as you have specied
in the printer driver.
(→P.139)
(→P.164) The type of paper specied in the printer driver does
not match the type loaded in the printer.
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the type of paper in the printer driver and
try printing again.
The length of printed images is inaccurate
Cause Corrective Action
In the printer menu, Band Joint is specied in Feed
Priority .
To ensure the feed amount matches the paper size,
select
Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length .
(→P.562)
You can adjust the feed amount in 0.02% increments.
(→P.57)
Load paper of the same type as you have specied
in the printer driver.
(→P.139)
(→P.164) The type of paper specied in the printer driver does
not match the type loaded in the printer.
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the type of paper in the printer driver and
try printing again.
Documents are printed crooked
Cause Corrective Action
Skew Skew Check Lv. has been set to Loose or Off . Choose Standard in Skew Check Lv. .
Width Detection has been set to Off . Choose On in Width Detection .
Troubleshooting 641