Canon imagePROGRAF iPF810, User Manual, Page: 688 / 710

Messages regarding printing or adjusment
Messages regarding printing or adjusment
Use another paper.
Cause Corrective Action
Press the Online button to clear the error.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.554)
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Press the Online button to clear the error, and then
adjust the feed amount manually.
(→P.566)
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or
larger.
Cause Corrective Action
The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger.
Lift the release lever and replace roll with 10 in. wide or larger roll.
Cause Corrective Action
The loaded paper is too small. Load a roll 10 inches wide or larger.
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Auto Band Adj. again, as follows.
1.
Press the Online button to clear the error.
2.
Print a test pattern to check the nozzles.
(→P.587)
3.
Clean the Printhead if the nozzles are clogged.
(→P.588)
4.
Execute Auto Band Adj. again.
(→P.564)
Highly transparent lm is loaded that cannot be used
for automatic feed amount adjustment. Press the Online button to clear the error, and then
adjust the feed amount manually.
(→P.566)
674 Error Message