Cutting Method
Printer Setting
Driver Setting
Paper
Cut-
ting
→P.739
Auto Cut
(See
"
Cutting
Roll Pa-
per After
Print-
ing
.")
→P.190
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting
after printing when
Auto Cut
>
No
is selected
or
Print Cut Guideline
is selected in the print-
er driver.
Otherwise choose this option if you want to cut
the roll edge after loading a roll.
Cut
but-
ton press-
ed
Yes
No
Cut
Guide-
line
Note
•
Automatic and Eject are valid only when you have selected
Auto Cut
>
Yes
in the printer driver.
•
With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
• Eject
is the preset selection in
Cutting Mode
for some types of paper. For this paper, we recommend keep-
ing the preset cutting mode.
•
If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific
amount before cutting to prevent problems with cutting and paper ejection. This may create a wider bottom
margin, in some cases.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
•
When cutting wide printed documents after ejection, have two people support the documents. If the paper
drops, printed documents may be damaged.
•
Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality or cause rough cut edges.
1.
On the
Tab Selection screen
of the Control Panel, press
◀
or
▶
to select the Paper tab (
).
Handling Paper
>
Handling rolls
>
Specifying the Cutting Method for Rolls
iPF6300
6
736
Summary of Contents for imagePROGRAF iPF6300
