Canon imagePRESS Server M10 Page 59 Service Manual Download | Manualshive

Page: 59 / 98

background image

4. Navigate to the downloaded Fiery Installer Builder .exe file and then double-click to install.

When the installation is complete, the Fiery Installer Builder window appears automatically. The installation creates the Fiery
Installer Builder icon on the Windows desktop.

■ Download the system software

You can download the system software from EFI cloud server to your local hard disk drive or network location using Fiery Installer
Builder. The approximate time required to download the system software image is 20 to 40 minutes.

NOTE:

The download time varies with the Internet speed, and size of the image.

● To download the system software

1. Start the Fiery Installer Builder.

Double-click the Fiery Installer Builder icon on the desktop or you can also click Start > EFI > Fiery Installer Builder.

IMPORTANT:

Do not exit the Fiery Installer Builder before it completes the startup process. Exiting the Fiery Installer Builder at the startup
process may cause a problem.

2. If you are starting the Fiery Installer Builder for the first time, the Select location window appears. Specify the folder

that you want to use to store the system software files.

You can browse or enter a folder location that is located on the local hard disk drive or in the network. The Fiery Installer
Builder keeps this folder location so that you do not have to enter the folder location again next time you start the Fiery
Installer Builder.
You can change the storage location in the Settings window.

3. If you have started the Fiery Installer Builder before, the downloaded product names are listed in the window. The

Add a new product icon appears if there is no product in the storage folder.

4. INSTALLING SYSTEM SOFTWARE

53

«
...
57
58
59
60
61
...
»

Summary of Contents for imagePRESS Server M10



































































































Reviews:

No comments

Related manuals for imagePRESS Server M10

Brand: F5 Pages: 2

WANJet 400 Appliance

Brand: F5 Pages: 11

Brand: Lantronix Pages: 6

Brand: Lantronix Pages: 27

Flex System p270 Compute Node

Brand: IBM Pages: 510

UniServer R4300 G5

Brand: H3C Pages: 16

Brand: MSI Pages: 54

Brand: Intel Pages: 32

SUPERSERVER 5015M-MF

Brand: Supero Pages: 120

Brand: Olive Pages: 24

Brand: LOOQS Pages: 69

DPR-1260 - RangeBooster G Multifunction Print Server

Brand: D-Link Pages: 55

Brand: D-Link Pages: 49

2500 - Color LaserJet Laser Printer

Brand: HP Pages: 24

Brand: HP Pages: 26

4650 - Color LaserJet Laser Printer

Brand: HP Pages: 2

615N - JetDirect Print Server

Brand: HP Pages: 56

4550 - Color LaserJet Laser Printer

Brand: HP Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands