Canon imagePRESS A3200, Installation And Service Manual

Page: 97 / 192

S
ERVICE
P
ROCEDURES
97
T
O REPLACE THE MOTHERBOARD BATTERY
1. Shut down the imagePRESS Server, remove all cables from the back, and open the system
(see page 59 ).
In order to access the battery, you must remove the left panel.
2. Locate the battery on the motherboard (see Figure 26 on page 76 ).
3. Carefully push the clip away from the battery until the socket ejects the battery.
F
IGURE
31:
Motherboard battery
4. Slide the battery out of its socket.
5. To insert a new battery, slide it into the socket so that the positive (+) side of the battery
faces up.
6. Press the battery down into the socket until it snaps into place.
Make sure that the battery is securely installed in the socket.
7. Reassemble the imagePRESS Server and verify its functionality (see page 130 ).
8. Configure the time and date in Setup.
Battery
Socket
Clip