T
ROUBLESHOOTING
143
Inspecting the system
If checking cable and board connections does not fix the problem, consider inspecting the
system component by component (see
) and verifying that each hardware component
is properly installed and configured before you decide to replace costly components.
If a component in the system you are servicing does not meet a condition listed in
it is not clear how to fix the problem (for example, if the system hangs before reaching Idle),
locate the behavior in
to see the suggested action(s) for solving the
problem.
T
ABLE
5:
Verifying the system
Conditions to verify
Part and additional page references
When the problem occurs, verify the following:
• Power cable is connected properly to the imagePRESS Server and
to the power outlet.
• The imagePRESS Server is powered on.
• Chassis fans are operating.
• At least one LED on the network connector is lit.
• All external cables required are present, in correct connectors, well-seated.
• Cables, cable connectors, and mating connectors appear undamaged.
Back panel external connectors, chassis fans, and
power connector,
If the problem occurs at power up or reboot, verify the following:
• Control Panel LCD lights up and logo displays.
• DVD drive is present and no media is in the drive.
• DVD drive accepts inserted media.
• No error messages or system hangs occur on the Control Panel before Idle.
DVD drive,
Summary of Contents for imagePRESS A3200
Page 10: ......
