Canon imagePRESS A3200, Installation And Service Manual

Page: 61 / 192

S
ERVICE
P
ROCEDURES
61
T
O OPEN THE IMAGE
PRESS S
ERVER
1. Shut down the imagePRESS Server (see page 59 ).
2. Wait 10 seconds after the imagePRESS Server powers off, and then remove all external cables
from the back of the system.
3. Remove all external panels necessary to access the component that you need to service.
At the minimum, you must remove the left panel to service the component. You may
also need to remove other panels, depending on the component that you need to access.
For guidelines on which panels to remove, see the service procedure for the given component.
N
OTE
:
When removing multiple panels from the imagePRESS Server, use the
following order:
• Left panel (see page 62 )
• Right panel (see page 62 )
• Front panel (see page 63 )
• Top panel (see page 65 )
N
OTE
:
Reverse the listed order when replacing panels.
4. Place the imagePRESS Server on a flat surface. Attach an ESD wrist strap before handling
internal parts (see “Precautions” on page 17 ).
All internal components that you remove must be placed on a grounded, antistatic surface
(see
page 19 ).
5. Carefully position the imagePRESS Server so that it is resting on its side and the internal
components are facing up.