T
ROUBLESHOOTING
141
Checking interface cables
Before removing the left panel of the imagePRESS Server to check internal components,
eliminate the most obvious sources of problems. Verify the following:
• All interface cables to the system are plugged into the proper connectors on the back panel
of the imagePRESS Server (see
).
• The power cable is plugged into the wall supply.
• The imagePRESS Server is powered on.
• The upper LED next to the 10/100/1000 Mbps network port is blinking to indicate
network activity (see
F
IGURE
50:
Back panel of imagePRESS Server
If all the connectors are properly in place and the power is on, proceed to the next stage of
troubleshooting.
Network 10/100/1000
Power switch
Bracket cover plate
USB ports
(SeeQuence Suite
dongle)
Power connector
Command/Status
Copier
interface
ports
To copier upper
port
To copier lower
port
N
OTE
:
Unlabeled
components
are not used.
Summary of Contents for imagePRESS A3200
Page 10: ......
