background image

3

THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR 
EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE 
AND ACCOMPANYING DOCUMENTATION.

5. TERM:

 This Agreement is effective upon opening the sealed disk 

package and remains in effect until terminated. You may terminate 
this Agreement by destroying the SOFTWARE and any copy thereof. 
This Agreement will also terminate if you fail to comply with any of the 
terms of this Agreement. In addition to Canon enforcing its respective 
legal rights, you must then promptly destroy the SOFTWARE and any 
copy thereof.

6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:

 The 

SOFTWARE is provided with RESTRICTED RIGHTS. Use, 
duplication or disclosure is subject to restrictions as set forth in either 
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer 
Software clause at DFARs 252.227-7013 or subparagraph (c) (1) and 
(2) of the Commercial Computer Software Restricted Rights Clause at 
FAR 52.227-19, as applicable.

7. SEVERABILITY:

 In the event that provision of this Agreement is 

declared or found to be illegal by any court or tribunal of competent 
jurisdiction, such provision shall be null and void with respect to the 
jurisdiction of that court or tribunal and all the remaining provisions of 
this Agreement shall remain in full force and effect.

8. ACKNOWLEDGEMENT:

 BY OPENING THE SEALED DISK 

PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS 
AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY 
ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS 
AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT 
OF AGREEMENT BETWEEN YOU AND CANON CONCERNING 
THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL 
PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, 
AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND 
CANON RELATING TO THE SUBJECT MATTER HEREOF. NO 
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE 
UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE 
OF CANON.

Should you have any questions concerning this Agreement, or if you 
desire to contact Canon for any reason, please write to Canon’s local 
affiliate.

International ENERGY STAR

®

 Office Equipment 

Program

As an ENERGY STAR

®

 Partner, Canon Electronics 

Inc. has determined that this machine meets the 
ENERGY STAR

®

 Program guidelines for energy 

efficiency.
The International ENERGY STAR

®

 Office 

Equipment Program is an international program that promotes 
energy saving through the use of computers and other office 
equipment.
The program backs the development and dissemination of 
products with functions that effectively reduce energy 
consumption. It is an open system in which business proprietors 
can participate voluntarily. The targeted products are office 
equipment, such as computers, monitors, printers, fax, machine, 
copiers, and scanners. The standards and logos are uniform 
among participating nations.

European Union (and EEA) only.

This symbol indicates that this product is not to be 
disposed of with your household waste, according to the 
WEEE Directive (2002/96/EC) and your national law. 
This product should be handed over to a designated 
collection point, e.g., on an authorized one-for-one 
basis when you buy a new similar product or to an 

authorized collection site for recycling waste electrical and 
electronic equipment (EEE). Improper handling of this type of 
waste could have a possible negative impact on the environment 
and human health due to potentially hazardous substances that 
are generally associated with EEE. At the same time, your 
cooperation in the correct disposal of this product will contribute to 
the effective usage of natural resources. For more information 
about where you can drop off your waste equipment for recycling, 
please contact your local city office, waste authority, approved 
WEEE scheme or your household waste disposal service. For 
more information regarding return and recycling of WEEE 
products, please visit www.canon-europe.com.
(EEA: Norway, Iceland and Liechtenstein)

Summary of Contents for imageFORMULA
































Reviews: