background image

10

Introduction

Thank you for purchasing the Canon imageFORMULA Flatbed 
Scanner Unit 101. Please read this manual thoroughly before using 
the scanner to familiarize yourself with its capabilities, and to make the 
most of its many functions. After reading this manual, store it in a safe 
place for future reference.

NOTE

An electronic version of this manual is installed to the following 
location as a PDF (Portable Documents Format) file during software 
installation from the setup disc.

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, 
restrictions, handling precautions, and instructions that should be 
observed for safety.

WARNING

Indicates a warning concerning operations that may lead to death or 
injury to persons if not performed correctly. To use the machine safely, 
always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to 
persons, or damage to property if not performed correctly. To use the 
machine safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read 
these items carefully to operate the machine correctly, and avoid 
damage to the machine.

NOTE

Indicates a clarification of an operation, or contains additional 
explanations for a procedure. Reading these notes is highly 
recommended.

Summary of Contents for imageFORMULA
































Reviews: