background image

93

Problem 5

Documents fed askew are causing scanned images 
to be slanted.

Solutions

(1) Align the document guides to fit the documents as 

closely as possible, and place the documents so 
that they feed in straight.

(2) Enable [Deskew] in the settings of the scanner 

driver.

(3) If many pages have been scanned since the last 

roller cleaning, clean the rollers and separation pad. 
If documents still feed askew, roller replacement or 
other maintenance may be needed. 

(See p. 87.)

(4) Perfectly straight scanning may not be possible for 

the document due to the structural design of the 
scanner.

Problem 6

Two-sided scanning is set in the scanner driver but 
both sides are not scanned.

Solutions

Note that if you use a job for which scanning only one 
side is set in CaptureOnTouch, only one side will always 
be scanned regardless of the settings of the scanner 
driver. For example, if you set one-sided scanning on 
the [Scanner setting] tab of the [Job Registration] dialog 
box of CaptureOnTouch, one side will always only be 
scanned with that job. Change the setting of the job or 
create a job for scanning both sides.

Problem 7

White lines/streaks appear in the scanned image.

Solutions

Clean the scanning glass (both the top and bottom) and 
rollers. When cleaning off dirt with adhesive properties 
such as glue and correction fluid, try applying a little 
pressure when wiping the places corresponding to 
where the lines appear. If the problem is not solved after 
cleaning, the inside of the glass may be scratched. 
Contact your local authorized Canon dealer or service 
representative.

Problem 8

Pages are skipped (missing).

Solutions

If [Scanning Side] of the scanner driver is set to [Skip 
Blank Page], pages with few black portions may be 
unintentionally deleted (skipped). Select another 
scanning mode such as simplex or duplex, or reduce the 
ratio for black dots. For the solution for missing pages 
caused by double feeding, see the following “

Problem 9

 

Pages become jammed or double fed.

Problem 9

Pages become jammed or double fed.

Solutions

(1) Scanning cannot be performed properly if the pages 

of the document are sticking together because of, 
for example, static electricity. Before you load a 
document, thoroughly fan the pages.

(2) Reduce the number of pages that you load into the 

scanner at one time.

Problem 10 I want to save scanned images in JPEG format, but 

they are saved in TIFF format.

Solutions

If a document is scanned when [Mode] is set to [Auto 
Color Detection] in the settings of the scanner driver, 
documents detected as black and white are 
automatically saved in the TIFF format regardless of the 
setting. This is because the JPEG format does not 
support black and white binary images. If you want to 
save all scanned images in JPEG format, set [Mode] to 
[Color] or [256-level Gray] and then perform scanning.

Problem 11 The scanned images are saved separately as 

multiple documents.

Solutions

When output file format is set to TIFF or PDF in 
CaptureOnTouch, multiple pages can be saved as one 
scanned image. To achieve this, select [File type], and 
then click the [Advanced Settings] button and select 
[Save all pages as one file] in the dialog box that 
appears.

Summary of Contents for imageFORMULA P-










































































































Reviews: