3-6
COPYRIGHT © CANON ELECTRONICS INC. 2012
CANON P-208 FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4. Eject Roller [Follower]
1) Remove the upper reading unit.
2) Push in the document pressure
{
1
, re-
move the separation pad
{
2
and remove 2
screws
{
3
(self-tapping, BH M2.5x6).
Figure 3-209
3) Unhook two pairs of fitting parts
{
1
for the
document pressure. Hold the reinforcing
plate
{
2
in the direction of the arrow, un-
hook the fitting parts
{
3
, lift and remove
the top cover (base)
{
4
.
Figure 3-210
Note:
If the reinforcing plate is not held, the
follower roller holder may come out.
Perform the work while holding the re-
inforcing plate.
When the top cover (base) is removed,
the center spring and light guide are
detached.
4) Hold the follower roller
{
1
by hand, slide
the reinforcing plate
{
2
in the direction of
the arrow, and remove the follower roller
holder
{
3
.
Figure 3-211
5) Pull out the shaft and remove the two
registration rollers
{
1
and the spring
{
2
.
Figure 3-212
