Canon imageFORMULA DR-G2090 User Manual Download Page 30

Page: 30 / 182

Front View (with Document Feed and Eject Trays extended)

Document Eject Tray Extension

Open the Document Eject Tray Extension to prevent documents
from falling off of the Document Eject Tray.

(See p. 43)

Document Eject Stopper

Adjust to fit the length of documents, to avoid document spillage.

(See p. 44)

Document Eject Guides

Adjust to fit the width of documents, so that ejected documents
stack neatly.

(See p. 43)

Document Feed Guides

Adjust to fit the width of documents.

(See p. 39, p. 40)

Document Guide Lock Levers

Locks the Document Guides.

(See p. 40)

Document Feed Tray

Load documents to be scanned here.

(See p. 37)

Document Feed Tray Extension / Wire

Extend as needed to fit the length of the documents.

(See p. 40)

Summary of Contents for imageFORMULA DR-G2090























































































































































































Search results

Summary of Contents for imageFORMULA DR-G2090

Reviews:

Related manuals for imageFORMULA DR-G2090

Brands by name

Popular brands

Canon imageFORMULA DR-G2090, User Manual

Search results

Summary of Contents for imageFORMULA DR-G2090

Reviews:

Related manuals for imageFORMULA DR-G2090

Brands by name

Popular brands