133
mDNS Setting
If you click [mDNS Setting] on the left menu, the page below is
displayed.
IP Address
Set the IP address of the scanner. If
DHCP is enabled, the IP address
obtained from it will be applied.
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
None
Subnet Mask
Set the subnet mask of the scanner. If
DHCP is enabled, it provides the
subnet mask. The value must be four
decimal numbers separated by dots
and expressed in the [xxx.xxx.xxx.xxx]
format.
When set to [0.0.0.0], a subnet mask
appropriate for the IP address is
automatically used.
None
Default
Gateway
Set the IP address of the scanner
gateway.
If DHCP is enabled, it provides the
default gateway. The value must be
four decimal numbers separated by
dots and expressed in the
[xxx.xxx.xxx.xxx] format. Also, the
gateway needs to be running in the
same subnetwork as the scanner. If
[0.0.0.0] is set, this setting is disabled.
None
Item
Description
Default
Value
Item
Description
Default
Value
mDNS
Enable/disable multicast DNS.
This setting allows scanning
applications to search for and
automatically connect to the scanner.
This is normally enabled.
When the setting is disabled, you must
manually specify the scanner using its
assigned IP address to scan from the
scanning application.
ON
