Canon imageCLASS MF4100 Series, Service Manual

Page: 130 / 140

Chapter 13
13-8
13.2.9.3 Bit 8 Elaborated
0014-6263
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
Enables to choose whether or not to carry out V.8 procedure during outgoing calls.
Change the setting to 'No' and V.8 procedure will not be carried out even if V.8 procedur has been received from the caller and T.30 procedure will be initiated.
13.2.10 SSSW-SW51
13.2.10.1 Function List
0014-6264
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
T-13-13
13.2.10.2 Bit 3 and 4 Elaborated
0014-6265
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
Enables to specify the output setting of protocol monitor report.
Each combination of Bit 3 and Bit 4 as shown below determines the output setting.
T-13-14
13.2.11 SSSW-SW54
13.2.11.1 Function List
0014-6266
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
T-13-15
13.2.11.2 Bit 6 and 7 Elaborated
0014-6267
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
Enables to select from different types of time and date display used in reports.
Each combination of Bit 6 and Bit7 as shown below determines the type.
T-13-16
Bit Function 1 0
1 Not in Use - -
2 Not in Use - -
3 Protocol Monitor Report Output 1 0*
4 Protocol Monitor Report Output 1 0*
5 Not in Use - -
6 Not in Use - -
7 Not in Use - -
8 Not in Use - -
(Bit3, Bit4)= (0, 0) Do not print
(1, 0) Print
(0, 1) Print when error occurs
(1, 1) Not in use
Bit Function 1 0
1 Not in Use - -
2 Not in Use - -
3 Not in Use - -
4 Not in Use - -
5 Not in Use - -
6 Time and Date Display in Reports 1 0*
7 Time and Date Display in Reports 1* 0
8 Not in Use - -
(Bit6, Bit7)= (0, 0) YYYY MM/DD
(1, 0) MM/DD YYYY
(0, 1) DD/MM YYYY
(1, 1) Not in Use